9 Points For Attention in Using Plastic Card Board

The use of some products, there are certain requirements, we need to understand its requirements, and then use. This is not only helpful to our use, but also won't lose. The same is true of plastic card board. What are the requirements for correct use of plastic card board? Let's follow aceally to discuss it!

1. Handle the plastic card board with care to avoid uneven force and damage when landing.

2. It is strictly forbidden to throw the plastic card board from high place, so as to prevent the card board from being broken by violent impact.

3. When using the handling equipment, it is necessary to consider whether the size of the goods is suitable for the use of plastic card board, so as to avoid supporting the card board due to improper size.

4. The goods should be placed evenly to avoid tilting during loading and unloading.

5. It is strictly forbidden to throw the goods into the plastic card board from a height. Reasonably determine the stacking mode of goods on cardboard. The goods should be placed evenly, not stacked, and stacked in an eccentric way. Bearing plates should be placed on flat ground or on the surface of objects.

6. When the forklift or manual hydraulic truck is operating, the forklift outside the forklift hole should be as far as possible. The forklift should be fully inserted into the forklift plate. The angle can change the stable lifting of the forklift plate. The splint shall not impact the side of the splint to avoid splint fracture or cracking.

7. When stacking is used, a bearing plate at the bottom should be considered.

8. If the card board is placed on the shelf, the shelf type card board must be used. According to the bearing capacity of the shelf structure, overloading is strictly prohibited.

9. The card board should avoid exposure to the sun, so as to avoid aging and shorten the service life.