How to Select Part Box for Part Storage？

The type, usage and management requirements of the parts to be stored are different, and the style of the parts box selected is also different. Thus. The following information is usually needed to know which type of parts box is actually selected: the parts are used to distinguish large and small parts by centralized management or decentralized use. Some parts need centralized management and high storage requirements, such as the clock and watch industry. At this time, there are more parts cabinets with doors. If some parts are used in a decentralized way, and there are requirements for centralized management, such as some parts stored in the warehouse, it is more appropriate to select the parts box. Today, aceally gives you a summary!

If the distance between the upper and lower shelves is relatively large, the small turnover box, also known as the flat mouth parts box, is usually selected for the storage of common parts (the small one is a box, the large one is a box, which is a habit of addressing, and there are also mixed use, so the product can only be determined in a more accurate way). The advantage of using this kind of flat mouth parts box is that it can be stored in large quantity and stacked layer by layer, unless the shelf is inclined and there is almost no need to worry about parts falling out. Small version turnover box, easy to handle.

If the stored parts are fine, various, and the shelf space is limited, we can choose the inclined box, which is the complete part box. As for the selection of hanging type or assembling type, it depends on the type of storage tool used. It can be confirmed that the load-bearing of the hanging type parts box is not as good as that of the group type. Some customers will think that the quality of the hanging parts box is not as good as the assembly when they see the different load-bearing. In fact, the hanging type, group vertical and quality of the parts box are completely unrelated, only related to the type of storage tools and storage habits.

In general, if the parts are placed on the workbench with high reuse rate during the working period, a series of problems such as the storage requirements of parts, the size of working space, working habits, etc. should be considered to decide which kind of parts box to choose.