Precautions For Plastic Tray Maintenance

As an indispensable part of warehousing and logistics industry, plastic pallet plays an important role. If the plastic pallet is used according to the correct use specification, it can not only give full play to its own role, but also extend its service life and reduce the purchase cost of the plastic pallet. Follow aceally to find out.

1. The plastic tray shall be placed gently to avoid uneven stress and damage when landing.

2. When placing the goods, they shall be placed evenly to avoid side tilt during lifting and handling.

3. When using the handling equipment, consider whether the size of the goods difference is suitable for the use of the plastic pallet, to avoid improper size and supporting the plastic pallet.

4. When stacking, the load bearing of the bottom tray shall be considered.

5. The correct use of plastic pallets should be achieved by packaging combination and stacking on the plastic pallets plus appropriate bundling and wrapping, so as to facilitate the use of mechanical handling and transportation, so as to meet the requirements of handling, transportation and storage.

6. Plastic pallets shall be protected from sunlight to avoid aging and shorten service life.

7. It is forbidden to throw the goods into the plastic tray from a high place. Reasonably determine the stacking mode of goods in the pallet. The goods shall be placed evenly, not in a centralized way, but in an eccentric way. Pallets carrying heavy objects shall be placed on flat ground or on the surface of objects.

8. It is strictly prohibited to throw the plastic tray from a high place to avoid the tray breaking and cracking caused by violent impact.

9. During forklift or manual hydraulic truck operation, the fork stab shall lean to the outside of the fork hole of the tray as far as possible, and the fork stab shall all extend into the tray, and the angle can only be changed after lifting the tray stably. The fork stab shall not hit the side of the tray to prevent the tray from being broken or cracked.

10. When the pallet is put on the shelf, the shelf type pallet must be used, and the bearing capacity depends on the shelf structure. Overload is strictly prohibited.