Tray Maintenance And Plastic Maintenance

If the plastic pallet is used according to the correct use standard, it can not only give full play to its own role, but also prolong its service life and reduce the purchase cost. So how to use it correctly? Aceally summed it up a little bit.

一、The following points should be paid attention to when using plastic pallet:

1.It should be handled with care to avoid uneven force damage when landing.

2.The load-bearing capacity of the bottom pallet should be considered when stacking.

3.When placing the goods, they should be placed evenly to avoid the collapse of the goods.

4.When using the handling equipment, it is necessary to consider whether the difference in size and weight is suitable for the use of the plastic pallet, so as to avoid damaging the plastic pallet by the size and weight.

二、The correct use of plastic pallets should be made to pack and stack on the plastic pallets with appropriate bundling and wrapping, so as to facilitate mechanical loading and unloading and transportation, so as to meet the requirements of loading, unloading, transportation and storage. In order to make the plastic tray can be used safely for a long time, we hope to use the plastic tray correctly according to the following requirements:

1.In the process of using the plastic tray, avoid exposure to sunlight, so as to avoid aging and reduce the service life.

2.When the plastic pallet is put on the shelf, the shelf type pallet must be used. The bearing capacity is determined according to the shelf structure. Overloading is strictly prohibited. Fork thorn can not impact the side of the tray, so as to avoid breakage and crack of the tray. The goods should be placed on average, not concentrated or eccentric. Reasonably determine the stacking mode of goods in the pallet.

3.It is strictly forbidden to throw the goods in the plastic pallet from a height. Pallets carrying heavy objects should be placed on flat ground or on the surface of objects.

4.When the forklift truck or manual hydraulic vehicle is working, the fork thorn shall lean to the outside of the fork hole of the tray as far as possible, and all the fork thorn shall extend into the tray, and the angle can be changed only after the pallet is lifted stably.

5.It is strictly forbidden to throw the plastic tray from a high place to avoid breakage and crack of the tray caused by violent impact.